Five RGB symbols
Five 16 × 16 mm symbols, each configurable with up to two operating colours.
Configurable RGB symbol display
Symbols clearly.
Configured freely.
A compact 1 × 5 railway indicator panel with monitored RGB symbols, interchangeable insert strips and horizontal or vertical installation.
Horizontal or vertical · Same base device1 × 5 RGBConfigurable symbols
2 orientationsHorizontal · Vertical
3 mounting typesScrew · Stud · Latch
IP65Front protection
01 Product overview
One device.
Many symbol layouts.
asis®Picto combines five bright RGB symbols with flexible installation and project-specific insert strips.
The same base device can be mounted horizontally or vertically. Only the insert strip changes, allowing the symbol orientation and content to match the driver desk while keeping electronics, interfaces and qualification consistent.
Customer-specific versions can be realised in almost any configuration. Examples include seven symbols in one row, a two-row 2 × 5 arrangement, or variants with a small integrated 7-segment indicator or display.
02 Core capabilities
Replaceable insert strips
Change project-specific symbols without replacing the base device.
Monitored indication
Redundant feedback monitors symbol activity and the displayed colour.
Flexible control
Use discrete inputs, sdxCAN or CANopen, plus lamptest and dimming inputs.
03 Mounting orientation
Horizontal or vertical.
Simply change the strip.
Both orientations use the same asis®Picto electronics and housing. A project-specific insert strip places the required symbols in the correct orientation.
HORIZONTAL
Orientation 01
Horizontal installation
Five symbols arranged across the driver desk for wide, low-height installation areas.
- 144 × 36 mm front
- Horizontal insert strip
- Five RGB symbols
VERTICAL
Orientation 02
Vertical installation
The same device rotated for narrow installation areas, using a vertically designed insert strip.
- 36 × 144 mm front
- Vertical insert strip
- Five RGB symbols
04 Mounting options
Three ways to fit the vehicle front plate.
Select the mounting method according to access, appearance and service concept.
Screw type
Front-mounted with two M4 cylinder-head screws.
Article 3662
Stud type
Rear-mounted to the front plate using two M4 nuts.
Article 3663
Latch type
Front-mounted using the integrated latch mechanism.
Article 366405 Signal integration
Command.
Indicate. Monitor.
Control symbols through discrete inputs or CAN while an independent feedback channel monitors activity and colour.
- Two configurable colours per symbol
- 0-10 V or PWM dimming
- Lamptest input
- Galvanically isolated diagnostic output
Control
→Digital inputs
CAN
Lamptest
Indicateasis®Picto
→Monitor
Activity
Colour
Error output
06 System integration
A flexible member of the asis® family.
Use asis®Picto independently or as a CAN-connected symbol extension for asis®Tacho.
asis®Tacho
Connected railway system component.
View product →
asis®JRU
Connected railway system component.
View product →
asis®JRU CPM
Connected railway system component.
View product →
asis®VS-100
Connected railway system component.
View product →
asis®GPS2.0
Connected railway system component.
View product →
asis®CHARTS X
Connected railway system component.
View product →07 Technical data
Compact, protected and monitored.
Railway-qualified materials and interfaces support new-build and retrofit driver desks.
- Arrangement
- 1 × 5 symbolsHorizontal or vertical installation
- Symbol size
- 16 × 16 mmProject-specific insert strip
- Dimensions
- 144 × 36 × 16.32 mm4.8 mm above front plate
- Weight
- 0.2 kgWithout ground bolt
- Supply
- 24-110 VDC ±30%16.8-143 V operating range
- Power consumption
- 0.5 W typical · 1 W max.Inrush below 300 mA
- Inputs
- 10 symbol inputsTwo colours per symbol
- Dimming
- 0-10 VDC or 24 VDC PWMProject-specific curve
- CAN
- 125 kbit/s to 1 Mbit/ssdxCAN · CANopen
- Digital output
- 24 VDC / 0.1 AGalvanically isolated
- Temperature
- -25 to +70 °CStorage -40 to +85 °C
- Protection
- IP65 front · IP21 rearIK07 front glass
- Altitude
- Up to 2000 mDuring operation
- Standards
- EN 50155:2022 · EN 45545-2:2020Railway-qualified
08 Downloads
Technical documentation.
The datasheet includes interfaces, installation options, insert-strip replacement, drawings and ordering information.
EN · PDFasis®Picto 1×5 DatasheetDownload ↓
MANUALSManuals are available on request.Contact us →
Your orientation. Your symbols.